Causes of errors in laser cutting machines

1. The thickness of the cutting material exceeds the standard.

The thickness of the plate that can be cut by a general metal laser cutting machine is less than 12 thicknesses. The thinner the plate, the easier it is to cut and the better the quality. If the plate is too thick, the laser cutting machine will be difficult to cut. Under the condition of ensuring the cutting, the processing accuracy will be error, so the thickness factor of the plate should be determined.

2. The laser output power is not up to standard.

When the laser cutting machine is commissioned, it is necessary to ensure that the laser output power reaches the standard. Generally, the higher the laser output power, the better the cutting quality on the same thickness of the plate.

3. The roughness of the cut sheet.

In general, the smoother the surface of the cutting material, the better the cutting quality.

4. The focus position is not accurate.

If the focus of the laser cutting machine is not aligned, it will directly affect the cutting accuracy, so it is necessary to calibrate and check before running. You can also purchase LXSHOW auto-focusing laser head when you choose the machine, auto-focusing, to ensure the cutting accuracy.

5. Processing speed.

The cutting speed of the laser cutting machine directly affects the processing accuracy. Therefore, before the operation, the cutting speed and the material should be matched to the best degree.