Cnc Oscillating Knife Cutter/Cnc Oscillating Knife Cutting Machine For Leather

Technical Parameters

Cutting method

Working characteristics Computer operation and cutting synchronization, continuous operation, high-speed data transmission at one time.

Cutting thickness ≤30mm

Cutting speed 0～1000mm/s

Cutting accuracy 0.2mm

Repeatability 0.01mm

Transmission port USB interface, RS232 serial port, Ethernet port, plug and play.

Control mode Pure computer control, user-friendly operation interface.

Fixed method vacuum adsorption

Knife type standard vibrating blade

Working voltage AC 220V ± 10%, 50HZ

Wind turbine 2.2KW, 5.5KW, 7.5KW, 9KW (number of specifications according to the required model)

Transmission system Import coupling + linear guide module

Motor with servo motor (standard Panasonic servo motor can be equipped with Panasonic motor)

Comprehensive power consumption Usually consumes 3 to 5 degrees per hour.

Maintenance instructions

Choose a good environment to use the cutting machine, should not be placed in a place with strong sunlight to avoid direct sunlight, so that the surface of the table will affect the service life; 2. Regularly wipe the machine table with alcohol to prevent the suction port from being clogged (do not pour the alcohol directly into the room) 3. The table is wiped); 3. The computer system is regularly maintained, optimized, and disinfected. The instability of the computer system will also affect the normal operation of the cutting machine. 4. Do not press or place scissors or other objects on the cutting machine to avoid starting the machine. 5. Touch the nose of the machine; 5. Do not press the rails and beams on both sides of the cutting machine to avoid damage to the track. 6. Avoid plugging and unplugging the cable. Do not plug or unplug the cutting cable online, otherwise the cutting machine or computer will be damaged. 7, electricity specifications: 220V, 50 or 60HZ, 1500W, one-way AC, need to install ground wire to prevent static electricity; 8, in the operation of the machine, do not put the head hand near the running beam or head, so as not to accident.